Mechanical Oil Flow Meter


Mechanical Oil Flow Meter

Specifications

Code Dm-01
Connecting Style NPT/BSPP Thread
Material Aluminium
Weight about 0.8 kg
Accuracy 25 mm ± 1.0%, 40 mm± 0.5 %
Repetition ±0.1%
Max. pressure 300 psi
Working Pressure 2-10 bar
Supposed Fitter Dimension 55 Mesh
Flow range 25 MM (1) 18.9-190 LPM
Flow range 40 MM (1-1/2 INCH 38.0-380 lpm

Petroleum Metering Equipment & Accessories
Mechanical volumetric flow-meter for private use, with Nutating-disc type chamber for delivers to 120 LPM. It can be installed for gravitational feeding, as well as for hand operated or electric transfer pumps with by-pass arrangement.

 

Fluid Compatibility
The DM-01 series meters are compatible with the following fluids : Diesel, Gasoline, Kerosene, Methanol


Installation

  • The oil meter could be install in any position, for non horizontal positions the flow shall upwards.
  • The meter shall be full of oil while operation.
  • Prior to installation of a meter, the pipeline shall be thoroughly flushed.
  • Straight pipe section of the same diarneter D as the rneter, having length of 10D and 5D shall be installed upstream and downstream of the meter respectively.

Yes! I am interested

Submit Your Requirement


Graph

Graph

Meter

Meter

Technical Details

Meter Mechanism Nutating disk
Flow Rate (range) 20-21I /MIN(5.28-31.7 Gal/min)
Operating pressure (max) 3.5 bar (49psi)
Brust pressure (max) 30 bar (420 psi)
Storage time (range) -20±80o
storage Humidity (max) 95.00%
operating temperature (range) -10±60o
Accuracy after calibration +/-1%
repeatability (typical) +/- 0.3%
Readout solution 0.1L/Gal
connection (inlet/oulet) 1 inch BSP/NPT
weight (approximate) Package dimension 1.8 kg 18x16x14 cm




Looking for "Mechanical Oil Flow Meter" ?